Skip to main content

SD Rack Dante Module (TN277)

The SD Rack Dante card is a bi-directional 8 input / 8 output module which can be installed in any SD Rack slot from 1-7. It should not be installed in slots 8-14.

On an SD MiNi or SD Nano Rack the card can be installed in any slot of your choice.

The card can run in DiGiCo systems at 48KHz or 96Khz and has both Primary and Secondary Ports for main and redundant connections.

The attached technical note provides information on its operation and functionality.

Was this article helpful?

0 out of 0 found this helpful