Skip to main content

DMI-Dante64@96z - Installation Files For Hyperport Compatibility

Release Date: October 2026

Download Links

DMI-Dante64@96z-HYPERPORT

 

HYPERPORT Overview

  • HYPERPORT is a low latency audio link between Fourier Audio transform.engines and compatible
    DiGiCo hardware.
    This update will enable DMI Dante64@96z cards to work in both Dante and HYPERPORT mode.

Compatible cards

  • This update is available for DMI Dante64@96z cards only. This refers to cards fitted with IP Zynq HC.
    Cards can be identified by looking in Dante Controller. Select the DMI card and open the Status
    menu. Cards fitted with IP Zynq will have a Model Name ending in “z”.
  • Cards can also be identified visually by looking at the colour of the Dante module. A black PCB indicates a card with IP Zynq HC. (See TN580 Rev2 for further reference).
  • Do not attempt to push these updates to DMI Dante64@96 fitted with Dante Summit HC modules.

     

  • The console must be running V22 application or later.
  • If used in an OrangeBox, OBC V3.0.0.117 is required, available here: Orange Box Controller

 

Was this article helpful?

0 out of 0 found this helpful