Q7 HORM system and overview screen setup (TN418)

05 December 2024 13:55 Updated

Introduction to HORM

HORM - Hibernate Once Read Many - is a Windows 7e function an equivalent to Ready On as
used on the older SD-series consoles based on Win XPe.
The functionality of this is slightly different. In the same way as Ready On, it protects the C:\ Drive
from unintended changes.

The method of making intended changes is quite different to the older system and is described
below.
The main difference that is immediately seen between HORM and Ready-On is that there is no
command line path to start an application on startup.

*In the case of a corrupted startup.ses preventing the console starting up correctly, holding the
SHIFT key will still offer the option of a “default start”. Hold the SHIFT key as soon as you see the
SD7 logo appear on the Master screen

External Monitor (EDID) registration & connection

External (overview) monitors connected with DVI connections all have a unique serial number
which the mixer OS must register. This is done ONE time only, for each monitor to be connected
to any given mixer (each engine independently) The OS HORM protection prevents registration
and must be switched off to enable the monitor to function.

The DVI-2 connection on the engine is covered in TN459. If used, the overview should be setup
first, before attempting to use DVI-2. The DVI-Test output is not used in normal operation and no
attempt should be made to connect to this.

Unlike other mixers in the SD series the external monitor is NOT connected to the mixer before
power up, before the first use. Should this be done the displays will usually arrange themselves to
a default setting meaning only the master screen is visible and others show an empty desktop.

Use of HORM system

The access the HORM system quit to Windows from the mixer program.
When working in Windows on SD7, always quit BOTH engines to Windows before further actions.

Touch “Quit to Windows” under the system button.

Click on the start button on the Windows task bar
See the selection of programs available

HORM location.png

This will open the HORM operating window, showing that HORM protection is active (ON)

HORM ON.png

Click “OFF” the engine will immediately shut down and restart.
This about ½ minute to complete
The engine will return to Windows and HORM window showing “OFF” is active

Protection is now disabled and adjustments in the operating system can be made.
Connect the monitor to be “registered” at this point.

Right click on the desktop, see desktop menu open and click on SD7Q Screen Settings

See the screen setup page open.
Ensure the screen layout is as follows.

If the layout of screen is not as shown this must be set.
With a new screen it may default to a horizontal spread.
Use the mouse in the conventional manner to click and drag the screens so they match above.
Note how the edges align.
The system will detect the appropriate settings for the overview screen in use (Plug & Play
operation).
When the screens are correctly set up, click on apply and OK to close the window.

It is possible to repeat this process with several different examples of overview screens and the
operating system will detect and remember settings for each screen, so long as the HORM
protection is disabled.
If the same screen is used again, the setup will be recalled automatically without further
adjustment. Note this applies to specific individual screens, not models or types of screen in
general.

Once the screen is correctly detected and setup, Close the setup Window

The HORM operating window will still be open, showing that HORM protection is inactive (OFF)

HORM OFF.png

Click “ON” the engine will immediately shut down and restart.
This takes about ½ minute to complete
The engine will return to Windows and HORM window showing “ON” is active

Protection is now enabled and adjustments to the system can no longer be made.

Quit the engine back to Windows and repeat the whole above procedure on the other engine.

Associated Documentation Downloads

TN418 SD7 Q7 Overview setup.pdf

500 KB

Was this article helpful?

0 out of 0 found this helpful

GENERAL EULA 25th February 2021
Please read and make sure you understand this End User License Agreement before you download and install any software from this website or use any goods sold to you by us which contain software. Scroll to the bottom of this page to continue.

DIGICO END USER LICENCE AGREEMENT

IMPORTANT- PLEASE READ CAREFULLY:THIS END-USER LICENCE AGREEMENT (“EULA”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND DIGICO UK LIMITED OF NO.5 THE DISTILLERY, SILVERGLADE BUSINESS PARK, LEATHERHEAD ROAD, CHESSINGTON, SURRY, KT9 2QL (“DIGICO”) FOR THE DIGICO SOFTWARE THAT ACCOMPANIES THIS EULA, WHICH INCLUDES COMPUTER SOFTWARE/ FIRMWARE WHICH MAY ALSO INCLUDE ASSOCIATED MEDIA, PRINTED MATERIALS, “ONLINE” OR ELECTRONIC DOCUMENTATION, AND INTERNET-BASED SERVICES AND DOWNLOADED SOFTWARE AND ANY UPDATES (“SOFTWARE”). AN AMENDMENT OR ADDENDUM TO THIS EULA MAY ACCOMPANY THE SOFTWARE.

YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE.

If You do not agree to the following terms, or do not fulfil the requirements set out in this EULA, no licence is granted to You by this EULA and You may not use, install or download the Software (and any copies of the Software that You do hold must be deleted or destroyed).

GRANT OF LICENCE.

1.1 In consideration of your paying any price charged for the Software or product sold by DiGiCo to You which contained the Software at point of sale (“Product”) and/or your use of any free Software and your compliance with these terms, DiGiCo grants to You the non-exclusive right to install and/or use the Software as specified in this EULA and in accordance with any documentation that accompanies the Software or Product online or in paper format (and which includes, without limitation, the terms and conditions upon which DiGiCo sold the Product to You) (“ Documentation ”).

THIRD PARTY SOFTWARE AND OPEN SOURCE SOFTWARE.

2.1 Some or all of the Software may consist of third party applications and packages which may be proprietary and / or open source software. You are obliged to comply with any additional licensing terms related to such third party applications. To the extent that this EULA contains any provision(s) which are contradictory to the terms of those third party applications and packages, the terms of those third party licences shall apply to that Software as opposed to the terms of this EULA and the terms of this EULA shall not apply to them. Unless stated otherwise in the documentation that accompanies the Software or Product, DiGiCo does not provide any warranty, maintenance, technical or other support for third party applications and all warranties in the Software are disclaimed as set out in clause 10 below.
2.2 A list of the third party software, acknowledgement and licences for each Product can be found at https://digico.biz/legal/open-source-software/
2.3 Certain software libraries and other third party software included with the Software are free software and licenced under the terms of open source licences. You may obtain a complete source code copy of such free software under the terms of the licence if applicable, without charge at https://digico.biz/legal/open-source-software/.
2.4 To the extent that the Software links to any open source software libraries (“OSS Libraries”) that are provided to You with the Software, nothing in this EULA shall affect Your rights under the licenses on which the owner of intellectual property rights in the relevant OSS Libraries (“Third Party Licensor”) has licensed the OSS Libraries, details of which can be found at https://digico.biz/legal/open-source-software/ To the extent that Third Party Licensors have licensed OSS Libraries on the terms of v2.1 or v3 of the Lesser General Public License issued by the Free Software Foundation (the “LGPL”), those OSS Libraries are licensed to You on the terms of the relevant LGPL and are referred to, in this clause 2.4 and in clause 6.1.4, as the LGPL Libraries. You may obtain a complete copy of the source code of the LPGL Libraries without charge at https://digico.biz/legal/open-source-software/ in order that You may modify the LGPL Libraries in accordance with the relevant LGPL, together with certain object code of the Software necessary to enable You to re-link any modified LGPL Library to the Software.

EXPORT/IMPORT RESTRICTIONS.

3.1 The Software, including technical data, may be subject to U. S. export control laws, and may be subject to export or import regulations in other countries. You agree to comply with all such regulations, and acknowledge that it is your responsibility to obtain all licences to export, re-export, or import the Software. In particular, Software may not be downloaded, or otherwise exported or re-exported (i) into, or to a national or resident of, Cuba, Iraq, Iran, North Korea, Libya, Sudan, Syria (as such listing may be revised from time to time) or any country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s list of Specially Designated Nations or the U.S. Commerce Department’s Table of Denial Orders.

INTELLECTUAL PROPERTY RIGHTS.

4.1 DiGiCo reserves all rights not expressly granted to You in this EULA or third party licences associated with it. The Software is protected by copyright and other intellectual property laws and treaties. DiGiCo or its suppliers own or have the right to license the title, copyright, and all other intellectual property rights in the Software. The Software is licensed, not sold, to You by DiGiCo, and You shall have no rights in or to the Software other than the right to use it in accordance with the terms of this EULA.

ADDITIONAL SOFTWARE/SERVICES.

5.1 This EULA and any amendment or addendum to this EULA applies to updates, supplements, or add-on components of the Software that DiGiCo may provide to You, including in accordance with clauses 2.2 and 2.3, or make available to You after the date You obtain your initial copy of the Software unless a further EULA is provided with these.

LICENSEE’S UNDERTAKINGS

6.1 Except as expressly set out in this Licence or as permitted by any local law, you undertake:
- 6.1.1 not to copy the Software or Documentation except where such copying is incidental to normal use of the Software or where it is necessary for the purpose of back-up or operational security;
- 6.1.2 not to translate, merge, adapt, vary or modify the Software or Documentation, assign the benefit or burden of this Licence in whole or in part, or to allow the Software to become the subject of a charge, lien or encumbrance;
- 6.1.3 not to make alterations to, or modifications of, the whole or any part of the Software nor permit the Software or any part of it to be combined with, or become incorporated in, any other programs, unless authorised by us in writing;
- 6.1.4 not to disassemble, decompile, reverse engineer or create derivative works based on the whole, or any part, of the Software nor attempt to do any such things except to the extent that:
  - (i) by virtue of section 296A of the Copyright, Designs and Patents Act 1988, such actions cannot be prohibited because they are essential for the purpose of achieving interoperability of the Software with another software program, and provided that the information obtained by you during such activities:
    - (a) is used only for the purpose of achieving interoperability of the Software with another software program; and
    - (b) is not unnecessarily disclosed or communicated to any third party without our prior written consent; and
    - (c) is not used to create any software which is substantially similar to the Software; and
  - (ii) the Software links to LGPL Libraries and reverse engineering of the Software is essential for debugging any modifications You have made to the LGPL Libraries.
- 6.1.5 where You are acting in the course of Your trade, business, craft or profession (“ Business Customer ”), not to permit the Software to be accessed through an electronic network beyond your normal place of business;
- 6.1.6 to keep all copies of the Software secure and to maintain accurate and up-to-date records of the number and locations of all copies of the Software;
- 6.1.7 to supervise and control use of the Software and (where you are a Business Customer) ensure that your employees, representatives and customers use the Software in accordance with the terms of this Licence; and
- 6.1.8 to include our and our licensors’ copyright notices on all entire and partial copies you make of the Software or any third party software we supply on any medium.
6.2 You must permit us and our representatives, at all reasonable times and on reasonable advance notice, to inspect and have access to any premises at which the Software or the Documentation is being kept or used, to the Products and other relevant computer equipment located there, and to any records kept pursuant to this Licence, for the purpose of ensuring that you are complying with the terms of this Licence.

RESALE AND SOFTWARE TRANSFER.

7.1 Software identified as “Not for Resale” or “NFR,” may not be sold or otherwise transferred for value, or used for any purpose other than demonstration, test or evaluation.
7.2 Internal: You may transfer the Software to an alternative system. After the transfer, You must completely remove the Software from the former system.
7.3 Transfer to a third party: You may make a one-time permanent transfer of this EULA and the Software to another end user. If you do so (i) You may not retain any copy of the Software, (ii) the transfer must include all of the Software (including all component parts, the media and printed materials, any updates and, if applicable, a Certificate of Authenticity) and be subject to this EULA. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end user receiving the Software must agree to be bound by this EULA and any amendment or addendum to this EULA.

TERMINATION.

8.1 Without prejudice to any other rights, DiGiCo may terminate this EULA if You fail to comply with any of the terms of this EULA. In such an event, all rights granted to You under this EULA shall cease, You must cease all activities authorised by this EULA and You must destroy all copies of the Software and all of its component parts within your control.

LIMITED WARRANTY & YOUR EXCLUSIVE REMEDY.

9.1 Subject to clauses 10.3 and 10.4, DiGiCo warrants that the Software will perform substantially in accordance with the DiGiCo materials that accompany the Software for a period of ninety (90) days from the date of receipt. If an implied warranty or condition is created by the laws of your territory that cannot be excluded, You are entitled to rely upon it, but only as to defects discovered during the period of this limited warranty (ninety days).
9.2 DiGiCo’s ENTIRE LIABILITY, AND YOUR EXCLUSIVE REMEDY, UNDER THE LIMITED WARRANTY PROVIDED IN THIS CLAUSE, OR FOR ANY OTHER BREACH OF THIS EULA, OR FOR ANY OTHER LIABILITY RELATING TO THE SOFTWARE, SHALL BE (AT DiGiCo OPTION), (I) RETURN OF THE AMOUNT PAID (IF ANY) FOR THE SOFTWARE, OR (II) REPAIR OR REPLACEMENT OF THE SOFTWARE, TO THE EXTENT THAT IT DOES NOT MEET THE LIMITED WARRANTY.
9.3 You will receive the remedy elected by DiGiCo. You are responsible for any expenses You may incur. The Limited Warranty provided in this clause is void if failure of the Software has resulted from accident, abuse, misapplication, abnormal use, a virus, or combination of the Product or Software with any other product or software. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer, and DiGiCo will use reasonable efforts to provide your remedy within a reasonable time of your compliance with DiGiCo’s warranty remedy procedures.
9.4 Where You: (i) are acting outside the course of Your trade, business, craft or profession, and are using Products for Your domestic, private, and non-commercial use; and (ii) you have either paid DiGiCo for the Software or a Product for which you were obliged to download and/or install Software on the Product for its proper functioning (“ Consumer ”) the warranties and remedies in relation to the Software shall be those contained in the terms and conditions upon which DiGiCo sold the Products to You as a Consumer (“ Consumer Terms of Sale ”).

DISCLAIMERS.

10.1 The Limited Warranty that appears above is the only warranty made to You and is provided in lieu of any other express warranties or similar obligations (if any) created by any advertising, documentation, packaging, or other communications.
10.2 Except for the Limited Warranty and to the maximum extent permitted by applicable law, DiGiCo and its suppliers provide the Software and support services (if any) “AS IS” and “WITH ALL FAULTS”, and hereby disclaim all other warranties and conditions, whether express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of merchantability, of fitness for a particular purpose, of reliability or availability, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses, and of lack of negligence, all with regard to the Software, and the provision of or failure to provide support or other services, information, software, and related content through the Software or otherwise arising out of the use of the Software.
10.3 DiGiCo DOES NOT WARRANT THAT THE SOFTWARE IS FREE OF BUGS OR ERRORS, AND THE EXISTENCE OF SUCH WILL NOT RESULT IN DiGiCo (i) BEING IN BREACH OF THIS EULA OR (ii) INCURRING ANY LIABILITY.
10.4 SO FAR AS IS PERMITTED BY LAW, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THE SOFTWARE.

Where you are a Consumer and there is any conflict between the terms of this clause 10 and the Consumer Terms of Sale, the Consumer Terms of Sale shall apply.

LIMITATION OF LIABILITY.

11.1 To the maximum extent permitted by applicable law, and except as provided in any DiGiCo guarantee provided with the Software or Product and the Limited Warranty (above), DiGiCo and its suppliers shall not be liable for any damages whatsoever (including without limitation, damages for loss of data, loss of business profits or business opportunity, business interruption, loss of business information or other direct, indirect, consequential or pecuniary loss) arising out of the use or inability to use the Software, even if DiGiCo has been advised of the possibility of such damages.
11.2 (WITHOUT PREJUDICE TO CLAUSE 9.2) IN ANY CASE DiGiCo’s ENTIRE LIABILITY UNDER ANY PROVISION OF THIS EULA SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE. THESE LIMITATIONS DO NOT APPLY TO ANY LIABILITIES THAT CANNOT BE EXCLUDED OR LIMITED BY APPLICABLE LAWS. SUBJECT TO THE FOREGOING, DiGiCo’s LIABILITY FOR INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS SHALL BE LIMITED TO BREACHES OF RIGHTS SUBSISTING IN THE UK.
11.3 Where you are a Consumer and there is any conflict between the terms of this clause 11 and the Consumer Terms of Sale, the terms of the Consumer Terms of Sale shall apply.

GENERAL.

12.1 Save where the Software forms part of a Product, this EULA (including any DiGiCo addendum or amendment to this EULA which is included with the Software and the licences referenced in clause 2) constitutes the entire agreement between You and DiGiCo relating to the Software and the support services (if any), and they supersede all prior or contemporaneous oral or written communications, proposals and representations with respect to the Software or any other subject matter covered by this EULA. To the extent the terms of any DiGiCo policies or programs for support services conflict with the terms of this EULA, the terms of this EULA shall prevail over such conflicting provisions.
12.2 This EULA is binding on You and DiGiCo and on any respective successors and assigns.
12.3 DiGiCo may transfer, assign, charge, sub-contract or otherwise dispose of this EULA, or any of its rights or obligations arising under it, at any time.
12.4 If any provision of this EULA is held by a competent authority to be illegal, invalid, void or unenforceable under the laws of any jurisdiction, such term, condition or provision will to that extent be severed from the remaining terms, conditions and provisions which will continue to be valid to the fullest extent permitted by law.
12.5 If DiGiCo fails, at any time during the term of this EULA to insist upon strict performance of any of your obligations under this EULA, or if it fails to exercise any of the rights or remedies to which it is entitled under this EULA, this shall not constitute a waiver of such rights or remedies and shall not relieve You from compliance with such obligations. A waiver by DiGiCo of any default shall not constitute a waiver of any subsequent default. No waiver by DiGiCo of any of these terms and conditions shall be effective unless it is expressly stated to be a waiver and is communicated to you in writing.
12.6 DiGiCo will not be liable or responsible for any failure to perform, or delay in performance of, any of its obligations under this Licence that are caused by an event outside of its reasonable control
12.7 All notices given by You to DiGiCo must be given to DiGiCo UK Limited at No.5 The Distillery, Silverglade Business Park, Leatherhead Road, Chessington, Surrey, KT9 2QL. DiGiCo may give notice to You at your most recent address (be it physical or e-mail) known to DiGiCo, and/or through a notice posted on DiGiCo’s then website. Notice will be deemed received and properly served 24 hours after an e-mail is sent, 24 hours after posting on DiGiCo’s website, or three days after the date of posting of any letter.
12.8 This licence shall be governed and construed in accordance with the laws of England and Wales. Subject to DiGiCo being entitled to enforce the terms of this EULA in any court or jurisdiction that it sees fit, any dispute arising from or related to this EULA shall be subject to the non-exclusive jurisdiction of the courts of England and Wales. Where You use the Software outside of England and Wales, the local law may impose greater restrictions on You that You must comply with.

YOUR ACKNOWLEDGMENT:

13.1 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS EULA, UNDERSTAND IT, AND AGREE BY USING THE SOFTWARE TO BE BOUND BY ITS TERMS.

Should you have any questions concerning this EULA, please contact:

marketing@digiconsoles.com

or

Marketing Dept,
DiGiCo UK Limited
No.5 The Distillery
Silverglade Business Park
Leatherhead Road
Chessington
Surrey
KT9 2QL
t: +44 01372 845600

Q7 HORM system and overview screen setup (TN418)

Introduction to HORM

External Monitor (EDID) registration & connection

Use of HORM system

Associated Documentation Downloads

Table of Contents

Related articles

Was this article helpful?

End User Licence Agreement