Skip to main content

DMI-Dante 64@96 IP Zynq HC Restore Firmware (TN582)

The new DMI-Dante64@96 with Zynq module ships with firmware version v105 from the factory – see Tech Note 580.

The card is compatible with SD and Quantum consoles, S-Series consoles and the OrangeBox.

As of May 2023, this card is not yet compatible with 4REA4 systems.

No firmware upgrade is required to use the card with the current versions of software. But since the card’s firmware version of v105 is not included in the current software packages, it is possible that older firmware gets installed which leaves the card inoperable.

This Tech Note explains the necessary steps to remedy this situation and re-install the v105 firmware.

Was this article helpful?

0 out of 0 found this helpful