Skip to main content

Fight Case VESA Monitor Pole Mount Details

Quantum7 / SD7 cases have 100mm long M12 bolts. 

 

Most other cases are fitted with 3/8 UNC 1-1/2 HT Bolts.  

This is the same diameter as M10 bolts, but with a slightly different thread. A pole with an M10 thread will go on for a short distance, but you will not be able to twist it all the way down as the thread is spaced out differently to M10. 

 

36mm Pole size sounds right for most cases apart from SD7’s and Q8-52’s

List below showing bolts used and cut out diameter for all cases with monitor mounts.

For most cases top layer of block has larger dimeter hole to take plastic cap.

 

SD7      Q25111                                M12  100mm Bolt                      Wishbone  Cutout 40mm

SD7EX       Q29491                          M12 100mm Bolt                       Wishbone Cutout 39mm

SD9   Q30225                                   3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

SD10   Q31563                                 3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

SD11  Q33056                                  3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

SD10-24  Q33609                            3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

SD5   Q34734                                    3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

SD12  Q71058                                   3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

Quantum 3-38   Q82240               3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

Quantum 2-25  Q84091                 3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

Quantum 3-26  Q86522                 3/8 UNC  1.5 Inch                      Wishbone Cutout 37mm Top Hole 40.5mm

(BOL12-025Z-HEX M12  was used for Reduced length version)  NO LONGER PRODUCED     

(Ca. Jan 2025) Quantum 3-26  Q93637       BOL12-025Z-HEX M12       Wishbone Cutout 39mm Top Hole 40.5mm

Quantum 8-52  Q91390                 BOL12-025Z-HEX M12              Wishbone Cutout 40mm  

 

Was this article helpful?

1 out of 1 found this helpful